This is the study of a conductive sheath-core bicomponent fibers. The intentions of the experiments were to investigate feasibility of conductive sheath-core bicomponent fiber forming using selected materials and the fibers’ properties. The trails were to extrude the bicomponent fibers with conductive materials in sheath section and supporting materials in core section. The conductive carbon black was selected as conductive material to compound with polypropylene. The virgin polypropylene was chosen as core material in the fibers. It was problematic to form fibers using the conductive carbon black polypropylene compound alone therefore the virgin polypropylene was used as the core section in the fibers to promote production stability. The sheath-core carbon black compound bicomponent fibers were steadily produced with designated machine settings. The produced fibers were tested for their physical and mechanical properties and electrical conductivity. The results shows that the fibers with the carbon black polypropylene compound as the fibers’ sheath section and the virgin polypropylene as the fibers’ core section have conductive property. The conductivity of the fibers increased when their sheath sections were thicker as the ratio of the carbon black compound become higher. Even though thicker sheath section of the fibers (40% and over) have higher conductivity the physical properties of the fibers become weaken and less applicable as textile fibers.

Bottle of poly propylene (Polypropylene: PP) to replace conventional non-conventional polycarbonate bottles. (Polycarbonate) are used as bottles and water bottles toys household goods which are BPA-contaminated and poly ethylene Terephthalic acid (Polyethylene. Terephthalate) PET water bottles juice bottles. Bottles And bottles and other drugs and chemicals have been canceled. Then turning to the bottle to PP because of the lightweight bottles float on water. Plastic and white The plastic safety can be reused many times (even used) in the UK has the plastic water bottles poly propylene and (Polypropylene: PP) to make water bottles so long but not as popular as bottle caps. open it (lid torn) bottle shape is beautiful with a little input. The process is a extrusion blow but from research using the dryer Injection blow (Stretch Blow) has studied the creation of injection molded preform 19 gram in order to blow a 500 ML size thickness. Preformed from 3.34 mm to 3.46 mm the average measured height of the preform from a mean of 70 mm measured at 69.88 m. m. the oldest of the preform. the average measured 25 mm and 24.96 mm is how a 500 ML size bottle blow molding blow molds percent discrepancy between the form specified. Average Percentage 0.0853 experimental results Blow the preform 19 gram of the injection can be molded into the bottle completely and can not be used as drinking water is due to the equipment used. blown trial Need to study next.

The purposes of the experimental project were to modify (FBSF) to compare plastic media form Small Pall Ring Bio-media Filter are commercially available. The model of FBSF consists of Equalization tank (EQ) Aeration tank with . The corresponding with Hydraulic Retention Time (HRT) 48 hrs. The factors used in the study are the essential parameter such as BOD COD SS TDS and changes in the Physical Characteristics of wastewater. polypropylene as a supporting media for Fixed Bed Submerged Filter polypropylene media 2 tanks Aeration tank with plastic media 2 tanks and Effluent tank The result experimental indicated that efficiencies of FBSF with 92.78% 75.90% 96.75% and 20.76%0 respectively gave the higher effluent values that the plastic media the efficiencies 84.20% 61.66% 94.12% and 14.80% 0. The effluent BODwas less than 20 mg/l. The was on clear less sediment no foul odor. The . polypropylene media in term of BOD COD SS and TDS removal of FBSF with of BOD COD SS and TDS removal of respectivelywastewater Fixed Bed Submerged Filter was effectively for the community household wastewater5 Rajamangala University of Teehnology Phra Nakhon