This project aims to develop RFID reader. With the following scope can scan at least 15 cards save both entry and exit data display Welcome on the screen and add or reduce codes by yourself The test results show that the RFID scanner can scan both key cards and manually scan both in and out. The screen also shows Welcome when someone enters and shows thank you when someone shows that the developed scanner can be applied really slowly

The objective of this study is to explore a method to improve UV protection and antibacterial properties of the cotton yarn surface to produce high-quality textile products. Cotton yarns were coated with sodium hydrogen phosphate magnesium chloride softener solution and 0 to 0.54 M of polyvinyl alcohol to hold surface yarns to the yarn body using the winding machine. The coated yarns were analyzed using Field emission scanning electron microscope Fourier transform infrared spectroscopy and UV-Vis spectrophotometer. Optimal results were achieved when coating with 0.45 M PVA exhibited UV protection was excellent protection. The cotton yarn coated 0.45 M polyvinyl alcohol displayed the antibacterial activity in the presence of Staphylococcus aureus and Escherichia coli was 87 and 91% respectively. The expected overall properties may open the way towards new applications of high performance fabrics leading to an innovative product development in the textile industry

Metaheuristic optimization approach has become the new framework for control synthesis. The main purposed of the control design are input (command) tracking and load (disturbance) regulating. This research proposes an optimal proportional-derivative (PID) controller design for the brushless dc (BLDC) motor speed control system with input tracking and load regulating constrained optimization by using the cuckoo search (CuS) one of the most efficient population-based metaheuristic optimization techniques. The sum-squared error between population-based metaheuristic optimization techniques. The sum-squared error between the referent input and the controlled output is set as the objective function to be minimized. The rise time the maximum overshoot settling time and steady-state error are set as inequality constraints for tracking purpose while the regulating time and the maximum overshoot of load regulation are set as inequality constraints for regulating purpose. Results obtained by the CuS will be compared with those obtained by the particle swarm optimization (PSO) and genetic algorithm (GA). From simulation results it was found that the parameters of CuS were optimal than both PSO and GA for BLDC motor speed control system satisfying the preset input tracking and load regulating constraints. In addition the simulation results are confirmed by the experimental ones from the BLDC motor speed control system developed in the laboratory.

Water became an important factor for propelling production process of any industries or factories and groundwater was option for production cost reduction especially in areas where had no surfacewater. B.Foods Product International Company Limited an affiliate of Betagro Group was located in Lop Buri Province to daily consume huge quantity of groundwater for production process in its factory. Measuring and recording levels of groundwater in 2 ground tanks related to volume of the water at time point of every 3 hours must continually be done every day in order to prevent lack of water fed into the factory that may impact of its production process. The main problem was caused of unexpected non-working of pumps. Knowing fluctuation of water levels could provide their immediate improvement and recover to avoid serious impacts. A microcontroller board could be employed to control groundwater volume in order that the company could closely follow up levels of groundwater in the ground tanks in real time and continuity. This study went on designing the microcontroller board for managing utility system and maintenance by using with level meter and wireless receiver and transmitter for testing working efficiency every 3 hours of each everyday during 1 February 2016 till 11 March 2016 totally 40 days. It was compared with those of same duration done manually. The findings revealed that the figured from 2 methods became similar and had very close relationship with each other. This could indicate that the simulated microcontroller board could be employed to automatically control groundwater volume efficiently. The company could bring it to appropriately trace levels of groundwater in the tanks in accordance with water usage behavior in each period of time for disruption of production process caused of insufficient quantity of groundwater. And this could be adaptable benefits for improvement of any organizations and also for any further studies

Proportional plus integral controller has been widely used in permanent magnet synchronous motor (PMSM) drive system due to its simple structure while achieving zero steady-state error. However finding out the optimal parameters of the controller is not an easy task. For this reason this paper presents an automated optimization of proportional plus integral controller for permanent magnet synchronous motor drive system using genetic algorithms. Simulation and experimental results verify the effectiveness than ones of the trial and error method.