To Improvement the power factor is very important. Because the costs are increased or reduced. To Improvement the power factor the higher the value it is necessary to buildings offices and industrial buildings or the fact that the industry needs real power. And reactive power source to operate. This research presents the design and construction of reactive power factor control. Which amounted to 6 working order by the first sequence is divided into three three-phase electrical power system and three consecutive singles phase by active power different. first1 is reactive at 5 kVAr second 2 and third 3 are reactive at 2.5 kVAr forth 4 fifth 5 and sixth 6 precious marine active 0.83 kVAr control. the power factor controller that controls RG3-12 pay Oval active in various sequences. As a result when not equipped with reactive power compensation software to control the power factor. This makes the flow of the high and low Power Factor schedule. When equipped compensate reactive power source to power factor control. Single-phase motor 1 kW and light bulb 1640-watt making the current decline of 14 amps rest 12 amps of the power factor increases from 0.5 to 0.929. When connected to three-phase motor with 2 kW 0.8 2.2 flow down from 2.360 rests 0.942 amps of power factor value up from 0.308 to 1.0.

This research is a study of the optimum heat temperature for baking sintered castings for burnout removal of EC 500 type ash wax from cast mortar. Improving jewelry casting process to reduce waste from silver jewelry production process. By studying the temperature of the mortar. To burn remove wax from the mortar and clean the gaps. Then try to bring silver water instead of metal casting. The results of a baked casing study using the EC500 housing prototype from the study showed that the EC500 wax material is melted from all solids to ash wax by heating at 850 ° C to burn. Remove ash wax which makes the cavity clean. When the casting was casted with 925 sterling silver the most complete workpiece after the improvement of the waste jewelry casting process was found to be 1 piece 1 percent 99 pieces or 99 percent.

The purpose of this research is to study assessment of safety in construction of building projects. The safety assessment form was developed by referring to the Ministerial Regulations. The safety assessment composed of 8 categories: (1) construction site perimeter (2) electricity and fire protection (3) crane (4) passenger lift and material hoist (5) welding (6) fall protection (7) temporary scaffolding and stairs and (8) personal protective equipment. Based on the safety assessment of the construction site the size of the large building exceeds 2000 m2 and height exceeds 23.00 m. in the Bangkok metropolitan has of 20 buildings. The average of safety is 80 percent. By construction site perimeter the highest average and the fall protection has the lowest mean. So all parties involved workers contractors and project owner in particular need to focus on safety work to prevention against falls from high in order to reduce the loss of property life company reputation including the morale of the work as well.

The objectives of this research are to propose an efficient and proper model that fits the cassava and rubber yields data. A generalized estimating equation (GEE) and a linear mixed model (LMM) with spatial correlation following the conditional autoregressive model (CAR) were adopted. The dependent variables are the cassava and rubber yields collected each month in every province of Thailand. The factors considered are rainfall averaged temperatures and regions. The results from GEE and LMM show that the factors influencing on the cassava and rubber yields are rainfall averaged temperature and region. Both GEE and LMM fit the correlated data. The GEE is used to explain the influence of factors on the yields in all provinces while the LMM is used to explain the influence of factors on the yields in each province.

The research is study motives the affect participation in quality assurance personal of Faculty of Engineering Rajamangala University of Technology Phra Nakhon from example group of 182 people which classified by sex ages position educational degree field of work and working life. This research is used themethod is collecting data by question tool themethod is questionare tool fo collected data that could be two categorized include knowledge skills and attitudes. The questionnaire is five rating scales that analyze the result by frequency percent average the average of standard deviation and T-test independent by using one way ANOVA. The results were as follows : From one hundred percent of the personnel of Faculty of Engineering Rajamangala University of Technology Phra Nakhon whom 63.70 persent classified by the educational field and 36.30% support line are ready to enter into Asean community which could be seen average in whole picture. After considering in three aspects the result appeared that knowledge and skills of personnel are also average. However the attitude of personnel was considered in a high level. Hypothetic test result was found that there was no difference among the personnel with difference sex ages educational degree field of work and working life in their readiness in entering Asean Community. position