This project aims to create a series of demonstration power plant water. And the operation of the circuit Inverter split by the end of demonstration runs as follows. Theory and documents relating to the source of electrical power water power the working principle of the circuit. Inverter the principle of integrated battery charger main circuit voltage VDC LED LED SMD (Surface-Mounted-Device) a voltmeter. Ammeters digital LCD display couples. Make plans to offer advisors the project approved. Design demonstration kit Equipment supply and assembly Assembly and demonstration the production of electricity from hydropower 220 VAC test run is a series of demonstrations to generate electricity from water power to 220 VAC storage performance voltage and current output. And analyze the results of the operation of the demonstration production of electricity from hydropower 220 VAC and conclusions in this chapter are the results of the experiment demonstrated the production of electricity from hydropower and the conclusion of the trial in order to be used. effectiveness of the objectives of the experimental procedure the results can not load a load test. Test kits demonstration power plant and the demonstration set to produce 220 volts for 25 minutes at a constant voltage. The electricity does not increase or decrease. Always works The term of office is fixed or reduced by the ratio of active power increases.

This research is studying of an electric field combine with a frying process in a Chinese water chestnut product for reducing oil absorb. An electric field that is used in an experiment will have a stress from 1-3 kV/cm. This will be generated by using a direct current high Voltage from 1066 to 3200 V. which is distributed to an electrode in an uniform and non-uniform of an electric field. This will have a dielectric barrier discharge. There is an analysis for finding a relationship of a moisture on absorbing oil of a Chinese water chestnut fried product due to a moisture has an effect on absorbing oil directly. From an experimental result this is found that the best electric field stress which will have an effect on reducing a moisture of a Chinese water chestnut is an non-uniform electric field form that is created from a direct current high voltage at 3200 V. and this will have an electric field stress at 3 kV/cm. This will have an average of a difference of a moisture at 0.6 g. This will select to use a direct current non-uniform electric field at 3 kV/cm. In an experiment combine with a fried process in a Chinese water chestnuts fried product this is done for reducing of absorbing oil. By this will fry at the temperature of 180๐C for 5 minutes. This is found that this can reduce an absorbing of oil best at 17.93% when this has compared to a Chinese water chestnuts fried that hasn’t passed an electric field.

This research studied the efficiencies of ceramic membrane filtration from industrial asphalt for dyeing wastewater treatment by forming a ceramic membrane in a diameter of 6 cm height of 2 cm. An appropriate proportion of industrial ashes: kaolin: sodium hydroxide solution mixed with sodium silicate solution was 46:18:36 at 800 ° C. For the properties analysis of ceramic membrane made from industrial ashes found that a shrinkage value compression resistance and density water absorption value and permeate flux were found 3 percents 0.6 Kilonewtons per cubic centimeter and 1.93 grams per cubic centimeter 45 percents 8.61 milliliters per square centimeter per minute respectively. Structural surface by a scanning electron microscopy was found that the porous inside of material was closely aligned together. Moreover precipitation of synthetic wastewater by using industrial ashes could help to increase the efficiencies of dyeing wastewater treatment. From the experiment it was found that the precipitation of synthetic wastewater with industrial ash was 94 percent filtration efficiency. On the other hand the efficiencies of synthetic wastewater treatment without precipitating of industrial ashes found only 69 percent. Moreover this research offers a new option for industrial wastes utilization.

This research has studied the treatment of municipal wastewater with shoe soles as a supporting media for Sequencing Batch Reactor. The objectives of this research were the conditions to for optimize growing Photosynthetic Bacteria (PSB) and understand the treatment efficiencies of municipal wastewater treatment with PSB in Sequencing Batch Reactor (SBR). Three types of shoe soles were applied in this research composed of rubber shoe soles neoprene and EVA and the control without shoe soles. The experimental factors included the essential parameters such as BOD COD SS MLSS MLVSS Phosphorus and Ammonia-Nitrogen. F/M Ratio was adjusted at 0.13 and hydraulic retention time (HRT) was at 5 days. The results indicated that the removal efficiencies of SBR with rubber shoe soles in terms of BOD COD SS phosphorus and ammonia-nitrogen were 87% 80% 94% 53% and 68% respectively. The removal efficiencies of SBR with Neoprene shoe soles in terms of BOD COD SS Phosphorus and Ammonia-Nitrogen were 89% 81% 95% 20% and 73%. The removal efficiencies of SBR with EVA shoe soles in terms of BOD COD SS phosphorus and ammonia-nitrogen were 91% 86% 95% 56% and 74%. The removal efficiencies of SBR without shoe soles in terms of BOD COD SS phosphorus and ammonia-nitrogen were 84% 79% 93% 86% and 67% respectively. The treated wastewater was rather clear low content of suspended solids and no malodor. From overall results the treatment of municipal wastewater by anaerobic sequencing batch reactor with different types of shoe soles was not significant for wastewater treatment efficiencies by anaerobic with any 3 types among of shoes soles can be efficiently applied for municipal wastewater treatment.

This research The project design and development of contemporary Product decoration for real wood identity in Thai Waterfront Architect. Study materials are made of product for Thai Waterfront Architect. The appropriate form furnished house has many of the current medium. Products include standard tests to determine the standard of real wood identity in Thailand architecture l in the structure of furniture design. The research The project design and development of contemporary Product decoration for real wood identity in Thai Waterfront Architect. vetiver from interviews with experts in the design. Conclusions regarding the manufacture and design of a study to determine specialists as appropriate. Researchers have taken a home furnishing is correct. Then residents of the residential-sized survey about home furnishing 200 who works as follows. Front of the house. The average was 4.85 most of the comforts average was 4.55 most security average is 4.75 most of the design value is 4.95 the overall satisfaction is at its greatest. The test standard furniture. The testing of materials furniture product decoration for real wood identity in Thailand architecture Static force acting on the basis of a test ride. The static force exerted on the backrest. In the test criteria. The static pressure test on the arm to the side and the force acting on the wing surface at the head. In the test criteria. The static pressure test on the press arm. In the test criteria. Criteria to test the force exerted on the seat and the backrest against the switch. In the test criteria. Force acting on the basis of the test. In passing the test. The impact tests and shock at the surface of the bracket. In the test criteria. Criteria for testing for the one side then drop free In the test criteria.