In this study we investigated on the mechanical properties and physical properties of light weight block mixed with banana fibers. For the cost effective purpose and environmental friendly product banana fibers which is rich in fiber was used as a precursor in producing light weight block. In this framework a series of blocks were fabricated using banana fibers for instead different raw material involve cement and sand for 28 days incubation. The result show that the block with mix banana fiber was replaced cement in 2.5 %wt has the density value and compressive strength is 1376 kg/m3 and 62.25 kg/cm3 respectively. While water absorption and the maximum shrinkage limit value are 32.86 % and 0.12 % respectively were obtain from the samples mixing 7.5% of banana fibers. After examination of of Thai Industrial Standard (TIS 1505- 2541) the result illustrated the value are standard. It can be concluded that the light weight block mixed banana fibers in ratio of sand: cement: lime: gypsum: aluminum powder: banana fibers are 50: 27.5 : 9 : 9 : 2 : 2.5 will also be used as an alternative precursor materials for producing the light weight block by natural raw materials for cost effective purpose.

The objective of this research was to study the treatment of Phosphate from wastewater by filter material with shells. Various parameters include pH temperature turbidity DO nitride ammonium and phosphate were investigated and compared before and after filler wastewater. The results show that the quality of wastewater after treatment enhancing with adding filter material with shells. The optimum ratio treatment of phosphate is resulting in maximum values was around 0.05 mg/liter (50% compare with wastewater before treatment) with formula no. 3 that not have time to filler. Moreover the results demonstrated the treatment of Phosphate from wastewater by filter material with shells can be improvement the value of turbidity nitride ammonia and DO for wastewater.

An MV-algebra G is an abelian monoid (G0+) with the operation * satisfying (x*)* = x x + 0* = 0* and (x *+y)*+y = (y*+x)* = x . Let G be an MV-algebra. A function f :G →G is called homomorphism if f (x + y) = f (x) + f (y) and f (x*) = (f (x)) * for all x and y in G . In this research we study the homomorphism and isomorphism theorem in MV-algebra.

The aim of this work was to study the magnetic properties of magnetic glass-ceramics with composition system SiO2-CaO-Na2O-P2O5-BaO-Fe2O3. The magnetic glass–ceramics were prepared by conventional melting at 1300oC for 2 h of the coprecipitation derived starting products and heat treated at different temperatures. The structure and microstructure of the samples were characterized by X-ray diffraction energy dispersive X-ray analysis (EDXA) and scanning electron microscopy. The magnetic measurement showed that the samples which contained barium ferrite exhibited magnetic behavior which is similar to soft magnetic materials. Finally the samples were soaked in simulated body fluid (SBF) for 14 days. The apatite was found to form on the surface layer of glass-ceramics and it increases with the barium ferrite content was increased.

This research work was to study the improvement of toughness and impact resistance of polylactic acid (PLA) with modified soybean oil (MSBO) and palm fiber (PF). The detail of this work was divided into three parts. The first was to find the suitable condition for modification of soybean oil with ozonolysis. The second and last parts were to study the effects of MSBO and PF contents on the properties of PLA respectively. For oil modification the reaction times were varied from 0 to 3 hours and the chemical changes in molecules of soybean oil were investigated by Nuclear magnetic resonance (NMR) and Fourier transform infrared (FTIR) spectroscopies. The result suggested that the most suitable condition for ozonolysis reaction was 2 hours considering the decrease in double bond between carbon atoms and the increase in hydroxyl group into molecular structure of MSBO. For the effect of MSBO content on mechanical properties it was evaluated by tensile and impact testing. Differential scanning calorimeter (DSC) and scanning electron microscope (SEM) were used for thermal and morphology analyses. The result showed that elongation at break and impact strength of modified PLA by MSBO increased about 89 and 25 % compared to those of neat PLA respectively. MSBO act as the efficient plasticizer for PLA considering the conversion of fracture behavior from brittle to ductile good dispersions of MSBO droplets in PLA and the decrease of glass transition temperature (Tg) with addition of MSBO. The addition of PF improved the impact strength of modified PLA. Strong interfacial bonding between PLA and PF indicated MSBO being both coupling agent for PLA and natural fiber and plasticizer for PLA. For migration test it was found that contents of released heavy metal and migrated chemical from specimens of PLA and PLA/PF composite were under the criteria according to Notification of the Ministry of Public Health (No. 295) B.E. 2548.