This study aims to development of production process of hard metal by tungsten carbide powder with the particle sized of 0.1 - 0.35 µm. This carbide powder were made of recycling cemented carbide tool scraps so it is mixed with Ta = 2.82 % Mo = 0.45 % Nb = 1.22 % Ti = 4.56 % Zr = 0.37 % The shape of the carbide powder are roughly round due to ball milling for 300 hours. It was mixing cobalt 10 % and Paraffin wax 2 % which is found the work piece that running through the process of sintering with a temperature of 1400 °c and 1430 °c have the hardness of 1368.5 and 1346.3 HV respectively. In one hour of holding time process the work piece with 1430 °c of the sintering causes less wear. After the test of turning operation it can be concluded that the tungsten carbide cutting tool provides the equivalent quality as a standard cutting tool.

The purpose of this research is to study the construction safety system for working at height. The safety system for working at height in this research is predetermined by department of labour protection and welfare and safety and health at work promotion association (Thailand). The safety system composed of (1) safety policy (2) safety organization (3) prevention measure (4) risk analysis (5) training (6) safety inspection (7) accident report and (8) emergency planning.

A distributed generation is a small-scale Installed in the customer density sources. The benefits of distributed energy resources is one example. To improve the reliability of power distribution system for the better. The increased reliability of power distribution system that is connected to the source of power distribution efficiency depends on the size of the supply and installation of power distribution are considered appropriate. To Evaluation the reliability in distribution system with the main purpose is to the minimization for customer interruption cost. The technique employed to minimization problem for customer interruption cost in solved by the developed tabu search algorithm together with reliability worth analysis that provide an indirect measure for cost implication associated with power failure. The developed methodology is tested with a distribution system of Roy Billinton Test System (RBTS) bus 2. Numerical results from the tests demonstrate that distributed generation can be used to promote economy and reliability of the distribution systems.

This Research purposes assessment of lightning performance on transmission system 69 kV in Metropolitan Electricity Authority (MEA). The case studies illustrated the lightning strike to direct top pole in order to guideline considering the critical flashover voltage value of insulator is able to withstand it and improvement lighting protection in the future. This solution analyzes using the Alternative Transient Program-Electromagnetic Transient Program (ATP-EMTP). The result found that voltage across insulator before and after improvement lightning protection by external ground wire. Factor effect to voltage across the insulators is the tower footing resistance wave of lightning current and interval between towers. It depends on relation with front time of wave. The analysis economics is very important. This Research is studying interruption cost of outage since back flashover so analysis the break even point of the installation external ground. The result found upon improvement lightning protection by installed external ground. The pay back period of that is 9 years installed ago. This result can conclusion is external ground able reduction interruption costs of outage.

The objective of this research is to study the readiness and procedure of the personnel in coping with the entering Asean community from example group of 126 people which classified by sex ages position educational degree field of work salary and working life. This study uses questionnaire as a tool in collecting data that could be categorized in three aspects knowledge skills and attitudes. The questionnaire is five rating scales that analyze the result by frequency percent average the average of standard deviation and T-test independent by using one way ANOVA. The results were as follows : From one hundred percent of the personnel of faculty of Engineering Rajamangala university of technology phra nakhon which 58.25% classified by the educational field and 31.75% support line are ready to enter into Asean community which could be seen average in whole picture. After considering in three aspects it appeared that knowledge and skills of personnel are also average. However the attitude of personnel was considered in a high level. Hypothetic test result was found that there was no difference among the personnel with difference sex ages position educational degree field of work salary and working life in their readiness in entering Asean Community.