This research presents the development of a low rate and low power consumption low rate wireless network. Low rate wireless networks are cheap and comprised of a small fully autonomous processing communication and remote control devices. The purpose of this study is to develop the system for remote wireless lighting system. They will work with wireless network system (WNS). WNS has been restricted power supply communication distance and low computing power. But they will work with network in vast area send and receive raw data from each network node. It has the ability to cooperatively collect data and retransmit in order to process or alert. The step of the experiment is creating main node and sub node in lighting area and transmission of control data between them with less electrical wiring. When wireless node not receiving or transmitting data the module can be switched into the sleep mode low power consumption mode. We can reduce the use of electrical wiring; insulated insulation material or other that related to and include energy too.

WC powder was obtained from recycling cemented carbide scraps. This metal power contained tungsten carbide (WC) at 89.17% titanium (Ti) at 4.90% tantalum (Ta) at 3.56% niobium (Nb) at 1.31% and molybdenum (Mo) at 0.93%. Its particle size and distribution was in the range of 0.03-85.31 µm. After quality improvement of the metal powder by ball milling screening and separating the compounds the result showed that the particle size of the metal powder was decreased to 0.01-0.10 µm (10-100 nm). The average size of the powdered particle was 28 nm. The tungsten powder was in more perfect condition by 95.85%

This research aims to study the shrinkage of plastic polyethylene Terephthalate used with the make blow mold in 2 stages. The shrinkage of work piece was determined in order to design the mold ; Z axis = 1% XY axis = 2.5% . The testing results were as follow. 1. Horizontal shrinkage(Z axis) was 0.85% which differed from the determined shrinkage(1%) at 0.15% 2. Vertical shrinkage(XY axis) was 1.83% that is 0.67% which differed from the determined shrinkage(2.5%) at 0.67%

Rajamangala University of Technology Phra Nakhon (RMUTP) has realized an important on knowledge management in its university by determining a vision strategy and knowledge management plan. We have founded a Knowledge Management Center to continually response in this issue. Causing learning culture; learning transfer and knowledge sharing using the information technology and knowledge integration which have benef its for the university and society the results of the study on knowledge management were: the satisfaction on the eff iciency development and work experience was at the high level (3.93) The satisfaction on changing learning behaviors of RMUTPs staffs was at the high level (3.68) The satisfaction on the eff iciency of learning transfer and knowledge sharing supported by the universitys surroundings was at the high level (3.61) The satisfaction on The universitys role as a social learning center was at the high level (3.85) and developing of university as a learning organization was at the high level (3.87)

This research was on the production of hardmetal from recovery of tungsten carbide tool scraps recycling through ball milling for 40 hours. The metal powder obtained which was of the size between 0.11-0.22 µm was composed of 96.69% of tungsten carbide (WC) 1.68% of tantalum (Ta) 1.21% of titanium (Ti) and 0.42% of niobium (Nb). When mixed with 5-15% cobalt binder metal cold isostatic press (CIP) sintered at 1450 ° C it became hardmetal work piece dimension 12.39 x 13.82 x 5.60 mm with 1410 HV hardness and 14.34 g/cm3 density. The result of S45C steel turning was tools life good. The research concluded that the hardmetal work piece produced by the developed material had suitable basic specification and would lead to the development in working in the future.