This research is a study of the Mekong Basin Craft. To develop new product models to increase commercial value. Study on handicrafts and the Mekong River Basin. To bring identity to the design of decorative products. Combined with the use of contemporary Thai art to help design to enhance the product. The study of home decor from the Mekong River Identity Model from Interviews with Design Experts Conclusion on the production and design of the model that the researcher has given the expert to determine whether it is appropriate. Researchers have adapted the style of home decoration. The manufacturer can actually model. A questionnaire on the style of home decoration 100 people which results as follows. Functional front Average 4.6 was the most comfortable. Average safety was 4.75. The average design was 4.7. Overall satisfaction was at the highest level.

This work presented the production of biogas using anaerobic co-digestion between hydrilla verticillata (HV) from Songkhla Lake Basin and chicken manure (CM). From the study of compositions of both wastes it was found that the COD of CM and HV were 11200 and 14400 mg/l and pH were 6.5 and 5.5 respectively. The biogas production using anaerobic single-digestion of untreated hydrilla verticillata (UHV) gave accumulative methane of 1251 ml-CH4/g-VS and methane production of 78.28 L-CH4/kg-substrate was obtained. For hydrilla treated with 2% w/v NaOH (THV) the accumulative methane was 1786 ml-CH4/g-VS and the obtained methane production was 91.87 L- CH4/kg-substrate which was 17.5 % increase when compared to the UHV. For the biogas production using anaerobic single-digestion of CM it was found that the accumulative methane and methane production were 978 ml-CH4/g-VS and 78.28 L- CH4/kgsubstrate respectively. These were lower than the studies using HV. The study of anaerobic co-digestion of HV and CM at three different ratios; 1:1 2:1 and 3:1 was studied. It was found that the anaerobic co-digestion using THV and CM at ratio 3:1 and 2:1 gave the highest potential for biogas production. The accumulate methane of 3202.20 and 2079.19 ml- CH4/g-VS were obtained respectively. The methane productions were 2.53 and 82.26 L-CH4/ton-substrate for ratio 3:1 and 2:1 respectively which is no significant different at 95 % confidence interval.

This research is Design and Development of Online Network. Providing the Academic Community with the Faculty of Architecture and Design. Rajamangala University of Technology Phra Nakhon. The purpose is 1) To develop online network. Community-based academic service to the Faculty of Architecture and Design 2 ) To design the image of the website. Networking Community-based academic service to the Faculty of Architecture and Design 3 ) To test and evaluate online network performance. Community-based academic service to the Faculty of Architecture and Design Rajamangala University of Technology Phra Nakhon The data was randomly sampling from 240 users and was analyzed by frequency average standardization and ranking.The research finds that the overall satisfaction toward the website development of the manager faculty were moderately at excellent level 4.58 and the standard deviation ofIt also found that the first satisfaction level toward website was in the content and graphic and overall satisfaction of specialist were moderately at good level 4.37 and the standard deviation of 0.69

This research aimed to develop compound of prototypes polymer bio-composites from cassava starch (CS) reinforced with agriculture residue the rind of durian fruit. Cellulose extracted from durian rind using hot sodium hydroxide and bleaching treatment with hydrogen peroxide. The removal of lignin and hemicellulose components from durian rind were investigated by fourier transform infrared spectroscopy (FT-IR). Cassava starch bio-composite films were prepared by solution-casting technique which includes 0-50 wt% of durian rind (DR) or durian rind cellulose (DRC) as reinforcement agent and urea/glycerol (GU ratio = 50:50) as plasticizer. The physical and chemical properties of thermoplastic starch (TPS)/DR and TPS/DRC bio-composite films were investigated. The percent elongation at break of bio-composite films were increased when compared to control CS film. From 15TPS/DR (80/20) films showed increase the elongation at break from 7.28 to 14.00% when compared to CS control films. While 15TPS/DRC (80/20) bio-composite films exhibited that the highest elongation at break to 77%. Durian fiber (DR or DRC) loading decreased the water absorption of plasticized bio-composite films. Furthermore incorporation of DRC in composite can be enhanced film stability in water better than DR. Therefore the effect of DRC reinforcement agent on TPS bio-composite films can improve water resistance and mechanical properties especially in terms of flexibility. Finally the waste of bio-composite films was degraded completely in soil burial test.

Economic development from foundations It is one that is considered and used in economic development throughout. Promoting community products is one way to help people in the country especially rural people live a better life. Today more emphasis is placed on the standard of community products. Including promotion. Therefore the packaging for community products should be easy to create which the villagers may create themselves. They are made from cheap raw materials or easily found in the community such as agricultural residues. There is a lot left over. It is also used to lessen the papaya. The research in the past research of the researcher to obtain information. About the papaya fiber. Can form sheet. The line in the basket. And in the fiber inside the papaya soaking time. When we peel the outer shell and the flesh in the decayed. The fiber is connected to the net It can be made into paper. If we develop paper production process using papaya fiber. Control the size and quantity of fibers. Has a good collider helps in adhesion. We can produce cardboard from papaya plant fibers. And the fiber in the mesh. Can also be used as a liner (Liner) with the nature of the current. Also can be sealed on corrugated paper. To get a beautiful textured paper (Texture) unique. Suitable for packaging boxes to promote the sale of community products. As well as other products as well. Research indicates that Physical properties of paper from papaya plant fibers. The paper is different. From the test it was found that the paprika plant fiber paprika on the plate and seal the skin. Physical properties are not suitable for processing into packaging. Because of the high thickness and fold lines do not match. Because the fiber is hard surface seal. When folding so frame And broken easily. Packaging of papaya plant fiber packaging. The paper is different. From the tests all three types can be packaged well because of the high strength of the fiber. There are also beautiful patterns. Can increase the value of the product as well. But the package of papaya fiber that is sealed with papaya fiber. The fiber is crisp in the body when folding. Fiber is broken. The satisfaction in paper packaging from papaya plant fibers. Based on three case studies the user satisfaction was assessed. Cardboard from papaya plant fibers up unprotected skin. Satisfaction was at the highest level. Cardboard from papaya plant fibers up the sheet and seal the skin. The satisfaction of the sample was at the highest level. And the corrugated paper seals the skin with a sheet of papaya. The satisfaction of the sample was at the highest level.